Separadoras Centrífugas de Alta Velocidad – HSS

SEGMENTO MARINE & POWER

MODELO - NPA MAB 103B
Tratamiento

TECHNICAL DATA SHEET
THROUGHPUT CAPACITIES: l/h SLUDGE AND WATER SPACE 5,6 litres
Rated Capacity: 1.300 The prescribed speed of the worm-wheel shaft, which must not be exceeded, is stamped on the name plate of the machine.
Fuel oils — diesel engine Distillate - Viscosity 1.5 - 5.5 cSt/40°C 1.150 Table of rpm at: 50 Hz 60 Hz
Lubricating oils, By-pass treatment; optimum.-R & 0 type- crosshead diesel 500 - Drive motor 1420 1500 1700 1800
Detergent - crosshead diesel 400 - Bowl spindle max. 8600 rpm
- trunk piston diesel 300 300 - Revolution counter 69-75 85-90
Steam turbine 800 For HFO – cleaning plants plants dimensioned specifically for operation in series, these figures are to be increased by 35%(purifier-clarifier plus stand-by).
Maximum density of oil 991 kg/m3 at 15◦C. Density preferably measured at 50◦C and according to ASTM method D 1298-80, corrected to 15◦C according to ASTM tables D 1250-80.

SOLICITE UNA COTIZACIÓN
MODELO - P 605
Tratamiento

TECHNICAL DATA SHEET
Main Supply Voltaje 3-phase, 220 V up to 690 V
Operating water pressure Min 2 bar, max 8 bar
Control voltage 1-phase, 100/110/115/230 V
Control air Min 5 bar, max 8 bar
Frequency 50 or 60 Hz

SOLICITE UNA COTIZACIÓN
MODELO - NPA MAB 304
Tratamiento

TECHNICAL DATA SHEET
SOLIDS-RETAINING CENTRIFUGAL SEPARATOR
MAXIMUM RATED CAPACITY: 2.700 l/h
Distillate 1.5 cSt - 5.5 cSt at 40°C 2.500 l/h
Marine Diesel MDO 14 cSt at 40°C 2.100 l/h
Diesel Engine Lube Oil Cross-Head 1.000 l/h
Trunk Detergent Lube Oil Detergent 700 l/h
Stream Tubine Lube Oil - 32-46 cSt at 40°C 1.300 l/h
Minimun - Maximun Temperature 30°F - 212°F
Drive Motor 3.600 rpm
Bowl Spindle 7.200 rpm

SOLICITE UNA COTIZACIÓN
MODELO - NPA MAB 305
Tratamiento

TECHNICAL DATA SHEET
SOLIDS-RETAINING CENTRIFUGAL SEPARATOR
CAPACITIES:
Distillate 1.5 cSt - 6 cSt at 40°C 4.700 l/h
MDO 13 cSt at 40°C 3.900 l/h
Cross-Head Detergent Lube Oil 1.800 l/h
Trunk Detergent Lube Oil Detergent 1.300 l/h

SOLICITE UNA COTIZACIÓN
MODELO - NPA MAB 305
Tratamiento

TECHNICAL DATA SHEET
SOLIDS-RETAINING CENTRIFUGAL SEPARATOR
CAPACITIES:
Distillate 1.5 cSt - 6 cSt at 40°C 4.700 l/h
MDO 13 cSt at 40°C 3.900 l/h
Cross-Head Detergent Lube Oil 1.800 l/h
Trunk Detergent Lube Oil Detergent 1.300 l/h

SOLICITE UNA COTIZACIÓN